Releases

This page is for contributors who check or publish Graft.

Checks

Run every command in the project’s devenv shell:

devenv shell -- pnpm install
devenv shell -- pnpm build
devenv shell -- pnpm typecheck
devenv shell -- pnpm test
devenv shell -- pnpm test:packages

Entering the shell formats the code with treefmt. pnpm test:packages tests the release script.

The CLI’s build also writes packages/cli/schema.json, the JSON Schema of the config file, from the loader’s entry fields and the intercepts the CLI registers. It is not committed; each release packs the one its build generated.

pnpm test checks every published entry for types that cannot be named through public exports, and emits declarations for unannotated consumer examples. If it fails, remove implementation types from the public signature or export a type that belongs to the public contract; do not add annotations to the examples to hide the problem.

GitHub Actions

The workflow .github/workflows/ci.yml runs for pull requests, for pushes to main, and for tags like v1.2.3 or v1.2.3-beta.0.

Job	When	What it does
check	Always	Checks formatting, builds, typechecks, tests, and packs every public package.
github-packages	Pushes and tags	Publishes the packed files to GitHub Packages.
npm	Tags	Publishes the packed files to npm with trusted publishing.

The publishing jobs run only after check passes. They publish exactly the files that check packed and tested, and never build again.

Publishing queues

Each registry has a fixed job concurrency group, with cancel-in-progress: false and queue: max.

Registry	Group
npm	publish-npm
GitHub Packages	publish-github-packages

• Scope. The group covers the whole publishing job: reading tags, choosing a tag, uploading packages and handling retries. Different versions cannot mix these operations on the same registry.
• Independence. The two registries have separate queues and can publish at the same time.
• Order. The queue order follows the time when a job starts waiting, not the version order, so the version comparison is still needed.
• Capacity. GitHub concurrency queues keep up to 100 pending jobs with queue: max. When the queue is full, GitHub cancels extra jobs, so check the Actions runs for cancelled publishing jobs and run them again after the queue is empty. Without queue: max, GitHub keeps only one pending job, and a third job replaces it.

Caution

The concurrency group only coordinates this repository’s CI jobs. Before a manual publish or a tag change, wait until all running and queued jobs for that registry finish, and stop new publishing jobs until the manual work is done. Other workflows that publish these packages must use the same group.

Versions

All packages are released together with one version. pnpm packages:pack sets that version in every public package, pins the dependencies between them to it, packs the packages into .release/ and writes the hash of each file to .release/release.json.

Event	Version	npm tag	Published to
A push to main	0.0.0-commit-<full hash>	sha-<full hash>	GitHub Packages
A tag like v1.2.3-beta.0	1.2.3-beta.0	alpha, beta, or rc	GitHub Packages and npm
A tag like v1.2.3	1.2.3	latest	GitHub Packages and npm

Install a prerelease or snapshot

A prerelease tag names its channel, alpha, beta or rc, followed by a number. Its packages go under the npm tag of that channel and never become latest, so npm install @graftland/graft keeps installing the last stable release.

You want…	Run
A prerelease	npm install @graftland/graft@beta
Any commit of main	npm install @graftland/graft@0.0.0-commit-<full hash> --registry=https://npm.pkg.github.com

For commit snapshots, use the version from the workflow run. GitHub Packages needs a token with read:packages, even for public packages. A package published there for the first time may be private; set its visibility once in the package settings on GitHub.

Publishing guarantees

Retries

You can run the publishing again under the same registry queue.

Situation	npm	GitHub Packages
Version exists with the same contents	Skipped. Tags are not changed.	Skipped. It can repair its channel tag if that does not move the tag backward.
Version exists with different contents	The script stops.	The script stops.
A tag is missing or was changed from outside	A maintainer with tag permission repairs it separately, under the same exclusive publication rule. Running the job again does not repair it.	Repaired as above.

The npm trusted publisher has publish permission only, so retries never call npm dist-tag.

Channels never move backward

Because publishing runs one at a time, latest, alpha, beta and rc never move back to an older version.

• A first upload and a GitHub tag repair use the same SemVer precedence comparison against the current version of the target channel.
• Numeric prerelease identifiers compare as numbers (beta.10 is newer than beta.2). Major, minor and patch come before the prerelease sequence. Build metadata does not affect precedence.
• The script reads the complete dist-tags object with an explicit @<channel> selector, so packages that have only prereleases do not need a latest tag.
• A missing channel (E404) can be set up. A package that has only prereleases has no latest yet; its tags are listed with npm dist-tag ls, so its first stable release sets latest up too. A successful response that is empty or malformed stops publishing.
• Running the version already on a channel again leaves the tag unchanged.

Late uploads

If a new upload is older than the current version of the channel, Graft still publishes the package under a fallback tag:

Release kind	Fallback tag
Stable	backport
Prerelease	alpha-backport, beta-backport or rc-backport

These tags mark late uploads and do not promise to follow the newest version. Install an older release by its exact version. Running an older existing version again does not move its channel or repair a fallback tag. For example, if you publish 0.2.0-beta.2 before 0.2.0-beta.1, or run beta.1 again afterward, beta stays on beta.2.

Note

Direct concurrent runs of the release script have no lock and do not give the channel guarantee. You still need the registry queue; version comparison alone cannot make registry reads and writes atomic.

Release a version

1. Make sure main passes CI.

2. Tag the commit and push the tag, such as v1.2.3. While Graft is on 0.x, release plain versions such as v0.3.0: a 0.x version already says the API may change, so it needs no -beta suffix. Prerelease tags such as v1.2.3-beta.0 remain available:

   git tag v1.2.3
   git push origin v1.2.3

3. The npm job waits for the npm environment, if it needs approval, and then publishes.

Trusted publishing

The npm job uses npm’s trusted publishing: npm accepts the OIDC token of the workflow run instead of an access token, and adds a provenance statement to every package. The repository stores no secret. Each package trusts the ci.yml workflow of graftland/graft in the npm environment:

npm trust github @graftland/graft --file ci.yml --repo graftland/graft --env npm --allow-publish
npm trust list @graftland/graft

Publish a new package

npm can trust only a package that already exists. A maintainer publishes a new package once from the files that CI packed, and trusts it afterwards:

gh run download <run id> --name packages-<commit hash> --dir .release
npm login
devenv shell -- pnpm packages:publish npm

Docs site

The workflow .github/workflows/docs.yml builds this site from packages/docs and deploys it to Cloudflare Pages at graft-docs-ekb.pages.dev. Every commit on main and every release tag keeps the docs as they were at that commit.

Address	Shows
https://graft-docs-ekb.pages.dev/	The newest commit on main.
https://<first 12 hash characters>.graft-docs-ekb.pages.dev/	That commit, forever.
https://versions.graft-docs-ekb.pages.dev/versions.json	Every deployed commit, its date, subject and tags.
https://graftland.github.io/graft/<path>	Redirects to <path> on production.

What a run does

Started by	Builds	Then
A push to main	The pushed commit.	Adds it to the list and makes it production.
A tag like v1.2.3	The tagged commit, only if it has no docs yet.	Labels the commit with the tag in the list.
Actions tab, backfill selected	Every commit on main since the docs site existed, and every tag, that has no docs yet.	Adds them to the list; production does not change.
Actions tab, rebuild filled in	The named commits, even if they have docs.	Replaces their deployments and updates the list.

• Once per commit. A commit is built once, with its own lockfile and toolchain, and its upload is never replaced. Production is the same upload sent again; Cloudflare skips the files it already has.
• Order. Runs update the list one at a time. Production moves only to a descendant of the commit it shows, so a late run never moves it back.
• Failures. A commit that no longer builds is left out; the others still deploy. If the live list cannot be read, the run stops rather than start a new one.
• Limit. One backfill builds at most 256 commits. Run it again for the rest.

Switching versions

Every deployed page loads the select from the versions address, so builds made before the select existed get it too.

• Select. Next to the theme select. It lists every deployed commit, newest first, by its tag or short hash, and opens the same page in the chosen one. A page that did not exist yet shows that version’s 404 page.
• Notice. A page of a commit that is not production says so at the top, with a link to the same page in the latest docs.

Set up

Task	How
Cloudflare project	npx wrangler pages project create graft-docs --production-branch main, once. Put the *.pages.dev name Cloudflare gives it in DOCS_PAGES_HOST and DOCS_URL of the workflow.
docs environment secrets	CLOUDFLARE_API_TOKEN, with the Cloudflare Pages: Edit permission, and CLOUDFLARE_ACCOUNT_ID.
Old address	Set the repository’s Pages source to GitHub Actions.
Docs of earlier commits	Start the workflow on main from the Actions tab with backfill selected.
Work on the site locally	devenv shell -- pnpm --filter @graftland/docs dev; the select appears only on deployed pages.

Writing pages

Language	Folder
English	packages/docs/content/docs
Simplified Chinese	packages/docs/content/docs/zh-cn
Traditional Chinese	packages/docs/content/docs/zh-tw

• Use the same file names in every folder.
• Link between pages with relative links, such as ../plugins/, so that links work under the site’s base path.
• Prefer tables, numbered steps and short lists over long paragraphs. Open a page with what it covers, and end it with where to go next.
• Every README has README.zh-CN.md and README.zh-TW.md translations next to it, written from the English README. If you change an English README or an English docs page, update the translations in the same change.